You're currently on:

Hood Straps

Hood Straps

FEATURING THE LARGEST SELECTION OF HOOD STRAPS IN THE WORLD!

Items 1 to 10 of 12 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
LEATHER HOOD CORNER PROTECTORS
$40.00

Here's a really cool corner protector, designed to keep from banging and chipping the paint from the very corners of your beautifully painted hood!  They are made from robust veg tanned leather, and install with a single nickel or brass double cap rivet.  Available in Natural Russet, Black, and special hand applied Mellow Tan and Dark Brown finishes.  Sold in sets of four.

 

Learn More

Add to Wishlist

Stainless Steel Guide Loops-Set of 4
$15.00

This set of four Stainless Steel Guide Loops are used as strap guides for our Deluxe Full Hood Strap and our Double D Full Hood Srap sets. Where the straps would normally slide to one side due to the curved and tapered shape of the hood, these loops are strategically placed to act as guides, keeping the straps properly aligned. Overall length is 2 3/4" and center of hole to center of hole measurement is approximately 2 1/8". They are designed for a strap that is 1 1/4" wide. Made of polished stainless steel. Sold as a set of four.

Learn More

Add to Wishlist

Neatsfoot Oil-4 Ounce
$4.95

WEIRD NAME-GREAT PRODUCT!  NEATSFOOT OIL-The finest leather strap preservative money can buy!  This incredible oil has been used for years to preserve and protect leather goods that are exposed to the harshest elements.  Especially usefull for leathers that are subject to multiple "wet/dry" cycles, or for leathers that are exposed to the sun, you won't find an easier to apply or more effective leather treatment.  Saddlemakers have been using this fantastic oil for years to breath life back into dryed out and aged leather saddles and harness.  This oil should also be used on unfinished leathers that lack the protection of a top coated and dyed finish, such as our "Natural Russet" leather.  Apply once or twice a year, and all of the leather accessories on your Hot Rod will last indefinately.  Easy to use, just wipe it on, let it soak in a minute, and buff off any excess.  From Hood Straps to Check Straps, Work Boots to Beater Bags, this oil is the best protection you can put on your leather goods!  Comes with FREE applicator sponge!


4 Ounces


 


NOTE:  May darken some lighter colored leather.  Keep this and ALL chemicals out of reach of children.


.

Learn More

Add to Wishlist

Neatsfoot Oil-8 Ounce
$8.95
Out of stock

WEIRD NAME-GREAT PRODUCT!  NEATSFOOT OIL-The finest leather strap preservative money can buy!  This incredible oil has been used for years to preserve and protect leather goods that are exposed to the harshest elements.  Especially usefull for leathers that are subject to multiple "wet/dry" cycles, or for leathers that are exposed to the sun, you won't find an easier to apply or more effective leather treatment.  Saddlemakers have been using this fantastic oil for years to breath life back into dryed out and aged leather saddles and harness.  This oil should also be used on unfinished leathers that lack the protection of a top coated and dyed finish, such as our "Natural Russet" leather.  Apply once or twice a year, and all of the leather accessories on your Hot Rod will last indefinately.  Easy to use, just wipe it on, let it soak in a minute, and buff off any excess.  From Hood Straps to Check Straps, Work Boots to Beater Bags, this oil is the best protection you can put on your leather goods!  Comes with FREE applicator sponge!


8 Ounces


 


NOTE:  May darken some lighter colored leather.  Keep this and ALL chemicals out of reach of children.


 

Learn More

Add to Wishlist

Shorty R Buckle Hood Straps
$229.00

Shorty R Buckle Hood Strap Set-This set of 4 "Shorty" style straps uses a strong and attractive "Roller Buckle", and a special tensioner inspired by an old design found on a 1926 Bently Racer.   They are designed for use with a full hood, or with only the hood top, with open sides-either way, they'll give your ride a great vintage look! 

These veg tanned 1 1/4" straps are made from extremely strong, heavy weight harness leather.  While they are made to spec to fit your paricular hood setup, they are adjustable, (you'll need to punch the hole for the buckle), and come assembled and ready to install, this is not a kit!   Made with strong stainless steel hardware and springs, with machine set nickel rivets. The strap size is made to order, with a  mount to mount length custom sized to fit any application as needed.  The mounting loops are approximately 2 1/2" long overall, and approximately 2 1/8" from hole to hole. 

Available in 5 different finishes, Black, Natural Russet, 50 Year Old Black, Mellow Tan & Dark Brown. There is an additional charge for the Mellow Tan and Dark Brown finishes, as they are hand applied, finished and buffed.  As with many of our hood strap sets, these are made to order.  Please allow 3-5 days production time for your straps. 

 

NOTE:  When ordering, please be sure to tell us what year, and model of hood you are running.  We have dimensions for most Ford Models from about 1910- 1937.   If you don't know what year your hood is, then please give us your hood measurements!  This will help us make your straps to exactly fit your application.  Input these dimensions in the comments section at our checkout page. We'll need the distance from the edge of the hood to the frame rail, at both the front and rear of the hood, taken about 4 to 6 inches in from the ends. We will build in enough adjustment so that your straps will fit properly, so give us the exact dimensions and we'll take it from there.  Since these hood straps are custom made to order, they may take a few days to produce, so please allow time for this.  Even with custom orders, we usually ship within 3-5 days of receiving the order.  If you have questions or aren't sure of what size you need, call us, we are happy to walk you through the measuring process!

 

Learn More

Add to Wishlist

Double "D" Full Hood Strap Set
$219.00

Double D Full Hood Straps Set - Clean. Simple. Basic. Functional. About as understated as any hood straps can be. These hood straps are the answer for anyone that wants the look & function of hood straps, without any of the flash.  The buckle system is a pair of heavy duty stainless steel "D" rings, making an infinitely adjustable buckle system that has been used by harness makers for hundreds of years...talk about "old school"! This set of 2 "over the top" style straps are made of our finest heavy duty 1 1/4" harness style leather, and feature stainless steel loops on the bottom, or frame rail mounts.  Adjustable to about any size, they are designed to fit most full 3 or 4 piece type Hot Rod hoods, or they can be used when running just the hood top, for a different look. We suggest using our Stainless Steel Guide Loops, available in this section, to keep the straps properly aligned. . Available in Black, Natural Russet, 50 Year Old Black, and new hand applied and finished Mellow Tan & Dark Brown at additional cost. These new finishes have a nice aged patina to them, creating a great "old fashioned" look!   Also available right next door in a "Shorty Style", which consist of a set of 4 "Shorty" style straps, designed to run from frame rail to edge of the hood top.

NOTE: When ordering, please be sure to tell us what year, and model of hood you are running.  We have dimensions for most Ford Models from about 1910- 1937.   If you don't know what year your hood is, then please give us your hood measurements!  This will help us make your straps to exactly fit your application.  Input these dimensions in the comments section at our checkout page. We'll need the distance from the center of hood to the hood top edge, and from the center of hood to the frame rail, at both the front and rear of the hood, taken about 4 to 6 inches in from the ends. We will build in enough adjustment so that your straps will fit properly, so give us the exact dimensions and we'll take it from there.  Since these hood straps are custom made to order, they may take a few days to produce, so please allow time for this.  Even with custom orders, we ship within 2-5 days of receiving the order.  If you have questions or aren't sure of what size you need, call us, we are happy to walk you through the measuring process!

NOTE:  50 YEAR OLD BLACK IS BACK! 

It's replacment, "Distressed Black", a much less "beat up" looking leather, is still available, too!  It still looks old, just not as old.  It is a black finish, with a mottled, slightly worn look.  Call for a sample. 

NOW, YOU'VE GOT 2 DISTRESSED, VINTAGE LOOKING LEATHERS TO CHOOSE FROM!!

Learn More

Add to Wishlist

Double "D" Shorty Style Hood Straps
$189.00

Clean. Simple. Basic. Functional. About as understated as any hood straps can be. These hood straps are the answer for anyone that wants the look & function of hood straps, without any of the flash. The buckle system is a pair of heavy duty stainless steel "D" rings, making an infinitely adjustable buckle system that has been used by harness makers for hundreds of years...talk about "old school"! This set of 4 "shorty" straps are made of our finest heavy duty 1 1/4" harness style leather, and feature stainless steel mounts top and bottom. Adjustable from about 15" to 22", they are sized to fit most any Hot Rod hood top. Available in Black, Natural Russet, 50 Year Old Black, and new hand applied and finished Mellow Tan & Dark Brown at additional cost. These new finishes have a nice aged patina to them, creating a great "old fashioned" look! Also available right next door in a "Full Hood" style, which consist of a pair of "over the top" style straps, designed to run from frame rail to frame rail over the top of the hood.

The optional Actylic Saddlemakers Clearcoat permanently protects the straps against damage from UV or wet weather.  We recommend this option for the NATURAL RUSSET, BLACK & 50 YEAR OLD BLACK straps, as they are essentially "unfinished" leathers.  Without this clearcoat finish, they should be regularly  treated with "Neatsfoot Oil" or other good quality boot oil  for longer service life. Mellow Tan and Dark Brown have the Saddlmakers Acrylic Clearcoat already.

NOTE: When ordering, please be sure to tell us what year, and model of hood you are running.  We have dimensions for most Ford Models from about 1910- 1937.   If you don't know what year your hood is, then please give us your hood measurements!   Input these dimensions in the "comments" section at our checkout page. This will help us make your straps to exactly fit your application.  We'll need the distance from the hood top edge to the frame rail, at both the front and rear of the hood, taken about 4 to 6 inches in from the ends. We will build in enough adjustment so that your straps will fit properly, so give us the exact dimensions and we'll take it from there.  Since most of our hood straps are custom made to order, they may take a few days to produce, so please allow time for this.  Even with custom orders, we usually ship within 2-5 days of receiving the order.  If you have questions or aren't sure of what size you need, call us, we are happy to walk you through the measuring process!

NOTE:  50 YEAR OLD BLACK IS BACK! 

It's replacment, "Distressed Black", a much less "beat up" looking leather, is still available, too!  It still looks old, just not as old.  It is a black finish, with a mottled, slightly worn look.  Call for a sample. 

NOW, YOU'VE GOT 2 DISTRESSED, VINTAGE LOOKING LEATHERS TO CHOOSE FROM!!

 

Learn More

Add to Wishlist

"Why?" Hood Straps
$199.00

Here's set of shorty hood straps that are designed for use with "Lakester Style" headers that restrict the ability to mount standard Shorty Hood Straps. They are designed to use a single lower mount, and a double mount on the hood top. These straps should only be used where there is sufficiant clearance from the headers such that the leather will not be so close to the headers as to be burned, or otherwise damaged. They are infinitely adjustable from about 17" to about 22" from lower mount to hood top mount. Like all our hood straps, these are made from heavy harness type leather, with stainless steel hardware, and machine set nickel rivets. Avaiable in Black, Natural Russet, 50 Year Old Black, and in our hand dyed and finished Mellow Tan, and Dark Brown for an additional charge.   As with most of our hood straps, these are made to order, so please allow 3-5 days production time proir to shipping.

The optional Actylic Saddlemakers Clearcoat permanently protects the straps against damage from UV or wet weather.  We recommend this option for the NATURAL RUSSET, BLACK & 50 YEAR OLD BLACK straps, as they are essentially "unfinished" leathers.  Without this clearcoat finish, they should be regularly  treated with "Neatsfoot Oil" or other good quality boot oil  for longer service life. Mellow Tan and Dark Brown have the Saddlmakers Acrylic Clearcoat already.

NOTE:  50 YEAR OLD BLACK IS BACK! 

It's replacment, "Distressed Black", a much less "beat up" looking leather, is still available, too!  It still looks old, just not as old.  It is a black finish, with a mottled, slightly worn look.  Call for a sample. 

NOW, YOU'VE GOT 2 DISTRESSED, VINTAGE LOOKING LEATHERS TO CHOOSE FROM!!

 

Learn More

Add to Wishlist

"Deuce" Style Hood Straps
$199.00

Here's a new style hood strap, designed just for you Deuce owners-or anybody running a '32 hood. It was designed with the assistance of a '32 owner that wanted to be able to run just a hood top part time to show off the engine, but he didn't want to be drilling holes or making modifications to ANYTHING. So, I designed a set of easy on/easy off Shorty Hood Straps, just for Deuce hoods. To install, all you need to do is pull the hinge pin, (or rod) out, take off the side panels, install the Shorty Straps onto the hinge rod, (see pics) set it back on the car. The top of the straps mount to the hinge rod, and the bottom of the straps mount to the original, stock spring loaded hood latches-no holes to drill, nothing to modify! When you want to put the side back on the hood, you can do so easily. And, they are infinitely adjustable, so they will be nice and tight, with just the tension from the stock hood latches! As with all our hood straps, they are made of 1 1/4" wide high quality, heavy harness type leather, with stainless steel hardware, and machine set nickel rivets. These are available in Black, Natural Russet, 50 Year Old Black, (with optional Acrylic Saddlemakers Clearcoat) and our new colors, Mellow Tan and Dark Brown. These two new colors have a bit of a patina to them, kind of an old, mellow looking finish, and they cost a bit more, as they're hand applied and finished.   As with most of our hood straps, these are made to order, so please allow 3-5 days for production time proir to shipping.

 

NOTE:  These are designed to fit a STOCK '32 FORD ONLY.  They are not designed to work with any other make, model or year. 

 

The optional Actylic Saddlemakers Clearcoat permanently protects the straps against damage from UV or wet weather.  We recommend this option for the NATURAL RUSSET, BLACK & 50 YEAR OLD BLACK straps, as they are essentially "unfinished" leathers.  Without this clearcoat finish, they should be regularly  treated with "Neatsfoot Oil" or other good quality boot oil  for longer service life.  Mellow Tan and Dark Brown have the Saddlmakers Acrylic Clearcoat already. 

NOTE:  50 YEAR OLD BLACK IS BACK! 

It's replacment, "Distressed Black", a much less "beat up" looking leather, is still available, too!  It still looks old, just not as old.  It is a black finish, with a mottled, slightly worn look.  Call for a sample. 

NOW, YOU'VE GOT 2 DISTRESSED, VINTAGE LOOKING LEATHERS TO CHOOSE FROM!!

Learn More

Add to Wishlist

Deluxe Full Hood Straps
$299.00

Deluxe Full Hood Straps Set  For the ultimate in over the top style hood straps, nothing beats the look or performance of our Deluxe Full Hood Straps Sets. Made from the same high quality, veg tanned harness style leather as all our other strap goods, these Deluxe Full Hood Straps are designed to go "over the top", mounting on one frame rail, going over the hood top, and mounting on the other frame rail. They can be used on full hood models, as well as those running just the hood top, giving each a unique vintage racer look. These beautiful 1 1/4" wide straps feature all stainless steel mounting hardware, buckles and tensioner hardware. This unique tensioner design was inspired by one found in old photos of a vintage 1927 Bentley Racer. The tensioner pads, as well as the optional buckle pads, are lined with a soft suede leather, to keep from harming your shiny paint job! These outstanding hood straps are infinitely adjustable, and are sized to fit most any early style Hot Rod hood, from Model A's to Deuce Coupes to RPU's. Maximum length is around 84", and minimum practical length is around 40", but these sizes can be adjusted accordingly to fit any application. Available in Black, Natural Russet, 50 Year Old Black, and in our new Mellow Tan or Dark Brown hand applied and buffed finishes at added cost.   As with most of our hood straps, these are made to order, so please allow 3-5 days production time proir to shipping.

The optional Actylic Saddlemakers Clearcoat permanently protects the straps against damage from UV or wet weather.  We recommend this option for the NATURAL RUSSET, BLACK & 50 YEAR OLD BLACK straps, as they are essentially "unfinished" leathers.  Without this clearcoat finish, they should be regularly  treated with "Neatsfoot Oil" or other good quality boot oil  for longer service life. Mellow Tan and Dark Brown have the Saddlmakers Acrylic Clearcoat already.

NOTE:     When ordering, please be sure to tell us what year, and model of hood you are running.  We have dimensions for most Ford Models from about 1910- 1937.   If you don't know what year your hood is, then please give us your hood measurements!  This will help us make your straps to exactly fit your application.  Input these dimensions in the comments section at our checkout page. We'll need the distance from the center of hood to the hood top edge, and from the center of hood to the frame rail, at both the front and rear of the hood, taken about 4 to 6 inches in from the ends. We will build in enough adjustment so that your straps will fit properly, so give us the exact dimensions and we'll take it from there.  Since these hood straps are custom made to order, they may take a few days to produce, so please allow time for this.  Even with custom orders, we ship within 2-5 days of receiving the order.  If you have questions or aren't sure of what size you need, call us, we are happy to walk you through the measuring process!

NOTE:  50 YEAR OLD BLACK IS BACK! 

It's replacment, "Distressed Black", a much less "beat up" looking leather, is still available, too!  It still looks old, just not as old.  It is a black finish, with a mottled, slightly worn look.  Call for a sample. 

NOW, YOU'VE GOT 2 DISTRESSED, VINTAGE LOOKING LEATHERS TO CHOOSE FROM!!

Learn More

Add to Wishlist

Items 1 to 10 of 12 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction