You're currently on:

Electrical

Items 1 to 10 of 14 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction
Battery Master Switch
$48.00

Master Battery Disconnect Switch. This simple SUPER HEAVY DUTY switch is likely the best way to keep your Hot Rod safe, and EVERY ride should have one.   Put it in a hidden location, and it will send the criminals looking for an easier victim!

Rated at 6-36 volts and 180 Amps. Uses 3/4" mounting hole. 2 hefty stud terminals with nuts and lock washers. This is a SUPER heavy duty piece, the best we've ever seen!  Face plate and complete detailed instructions included.

Learn More

Add to Wishlist

Battery Tie Down
$25.00

These leather battery tie down straps are a must have for that vintage look.  And, they function as well as they look!  Made of heavy weight harness leather, they feature stainless steel mounting loops, and a stainless steel buckle.  They are 1" wide, and are sized to fit most any 6V or 12V battery.  Use these in conjunction with our new "battery pad".  Available in 5 different finishes.

Learn More

Add to Wishlist

Dash Warning Lights
$5.80

Small dash warning lights - About 5/8" in diameter, with a nice thin chrome trim ring around them.  They snap into a 1/2" hole.  These are NOT LED's-(I HATE LED'S! ...don't like anything about them.) - These use a regular incadescent light.  Available in Red-Blue-Green-Amber.  12 Volt, 2 wire. 

NOTE:  Actual Lights may vary slightly from picture shown.  May NOT have black backside, and lenses may vary from picture, depending on stock availability.

Learn More

Add to Wishlist

Toggle Switch With Safety Cover-Black

Toggle Switch With Black Safety Cover-  12V SPST On/Off toggle switch with a black safety cover that; when open allows for switch to be turned to the On position, and when closed it turns switch to Off position and prevents the switch from accidentally being turned On.  Two brass screw terminals on the backside


These are very cool looking, military / aircraft / race car / industrial style switches, perfect for operating any accessories, lights, ignition or whatever.   Use them in combination with our small dash warning lights.  Available in black and red.

Learn More

Add to Wishlist

Toggle Switch With Safety Cover-Red

Toggle Switch With Red Safety Cover - 12V SPST On/Off toggle switch with a red safety cover that; when open allows for switch to be turned to the On position, and when closed it turns switch to Off position and prevents the switch from accidentally being turned On.  Two brass screw terminals on the backside.


 These are very cool looking, military / aircraft / race car / industrial style switches, perfect for operating any accessories, lights, ignition or whatever.   Use them in combination with our small dash warning lights.  Available in black and red.

Learn More

Add to Wishlist

Small Nickel Plated Gauge Guards

Smaller Nickel Plated "GAUGE GARDZ"-Designed to be used with any gauge set, or our new Large Dash Indicator Lights, (Now available), they are inspired by Deco/Industrial design from the 1930's.  They were used to keep switches from being accidently actuated on industrial machine control panels, and to keep the lenses and warnig lights from being damaged in rugged industrial conditions. They also  make it easier to locate and actuate switches in environments where heavy gloves are worn, like aircraft or race car cockpits. They are approximately 1" from mount hole to mount hole, and stand about 5/8" tall.  Installs to panel with 2 screws (supplied ) from behind. Sold individually, or opt for our "Bulk Pricing"  deal and get 5 GARDZ for just  $25.00!  That's enough for 4 gauges or lights..

Learn More

Add to Wishlist

Large Nickel Plated Switch Gaurds

Large Nickel Plated SWITCH GARDZ-Designed to be used with our Ball End toggle switches, or our new Large Dash Indicator Lights, (available right next door!), they are inspired by Deco/Industrial design from the 1930's.  They were used to keep switches from being accidently actuated on industrial machine control panels, and also to make it easier to locate and actuate switches in environments where heavy gloves are worn, like aircraft or race car cockpits. They are approximately 1" from mount hole to mount hole, and stand about 1 1/8" tall.  Installs to panel with 2 screws (supplied ) from behind. Sold individually, or opt for our "Bulk Pricing"  deal and get 5 GARDZ for just  $25.00!  That's enough for 4 switches..

 

Smaller sized "GAUGE GARDZ" available right next door!

Learn More

Add to Wishlist

Leather Legend Plate

Use these leather embossed  legend plates for that detailed vintage look.  These leather ovals are embossed with chrome foiled "On & Off" in an old style font.  They are designed for use with our Ball End Toggle iveswitches, but you can use them for any switch you choose.  They are 2 3/4"x 1 5/8" with a 1/2 hole in the center.  they are mounted using a 3M heavy duty automotive trim adhesive, super. easy to install,  just peel off the backing, and stick in place.  COMING SOON: Matching  Leather Legend Plates for Lights, Fan, Ignition, heater & more!

Learn More

Add to Wishlist

Ball End Toggle Switch-SPST

A Hot Rod Leather exclusive, not available anywhere else!

Here's a heavy duty Toggle Switch unlike any you've seen lately.  It has something that is impossible to find these days- what's called a "Ball End Toggle".    These were pretty common back in the day, and I've seen some in vintage catalogs, but these days,  they are extremely rare if you can find them at all.  These and the "Switch Guards" were used in industrial machine & equipment applications, and in environments where gloves were worn, (like aircraft, roadsters & race cars), making it easier to feel and actuate the switch.

This is a heavy duty switch, made for applications like headlights, fans or any other automotive type switching.  They have solid brass screw on terminals on the back, and requires a 1/2" hole for mounting.  Comes with small aluminum "On-Off" legend plate, jamb nut, and knurled face nut.  Shown with optional leather "On-Off Legend Plate", and our new nickel plated "Switch Gardz".

 Brass screw terminals-frame and support are steel with zinc chromate, case is black phenolic plasic-All other external parts are brass/bright nickel 

SPST Switch Rating:  10A @ 277V AC, 20A @ 125V AC, 21A @ 14V DC, 3/4 HP 125-250V AC

 

NOW AVAILABLE IN NEW CONFIGURATIONS!  - Same great quality Ball End Toggle Switch, but in new configurations!  Use them for high-low beam, DTRL's, raising & lowering suspensions, actuate power wondows, whatever you can come up with!  And, if you don't see the switch you want here, please let us know, chances are we can special order it for you!

 

ALL SWITCHES ARE: SPST Switch Rating:  10A @ 277V AC, 20A @ 125V AC, 21A @ 14V DC, 3/4 HP 125-250V AC

 

( ) Denotes "Momentary" - EXAMPLE:  OFF-(ON)  is a normally OFF, momentary ON switch.

Learn More

Add to Wishlist

Classic Chrome Starter Button
$23.00

.This is a standard style of starter button that's been around for many years. Small, chrome with a nice chrome finished ring bezel. This is a good quality, heavy duty button that is built to last. Fits a 5/8" hole. Two screw wire connections on the back. Use this in combination with our "Off-On Only" Keyed Starter Switch for a classic, traditional ignition/starter set up for your dash.

 

*Appearance may vary from picture

Learn More

Add to Wishlist

Items 1 to 10 of 14 total Page:
  1. 1
  2. 2
  3. Next
Show per page
View as: Grid  List  Sort by Set Ascending Direction